Kaleido Maintenance

We will be adding more up to date maintenance videos and photos coming soon!

Removing the drum of your roaster for cleaning:

NOTE: The procedure is the same regardless of roaster size.  The roaster in this video was a V1 model.  The steps are the same.  See bolt pattern below if you are unsure of which bolts to remove.

NOTE: The roasters do not come with the "yellow allen wrench". If you wish to remove your drum from the roaster, please purchase a 4mm allen key or wrench.  A long t-handle is recommended but not required.

 

Faceplate Bolt Patterns V2 Sealed:

NOTE: the bolt patterns are the same regardless of Pro or Dual.

NOTE: Some people say these are not the correct bolts, but please loosen these bolts and pull a bit harder on the faceplate.  A build up of oils, etc can make the faceplate stick to the front of the roaster body.

Kaleido M1:

The Kaleido M1 uses 2.5mm allen head screws to hold the faceplate on.  Please use a 2.5mm allen key.

Kaleido M2:

The Kaleido M2 uses 3mm allen head screws to hold the faceplate on.  Please use a 3mm allen key.  

Kaleido M6:

The Kaleido M6 uses 3mm allen head screws to hold the faceplate on.  Please use a 3mm allen key.

Kaleido M10:

The Kaleido M10 uses 3mm allen head screws to hold the faceplate on.  Please use a 3mm allen key.